Howto How To How-To stuff engine dodge neon plymouth neon 95 96 97 98 99 2000 2001 2002 2003 2004

euro amber turn mod tails euro style neon reverse light voltmeter socket altezzas bulbs bulb


dodge neon dodge neon plymouth neon 95 96 97 98 99 2000 2001 2002 2003 2004

How To's


How to install an AEM Wideband Gauge



One of the most important things you can know about your car is where you stand with your air/fuel ratio. The AEM wideband UEGO sensor controller accurately monitors Air/Fuel ratios (AFR) during the tuning process to prevent a lean fuel mixture, which could lead to engine damage.

Tools Needed:
Wrench
Drill
Zip Ties
O2 Bung (included)
Gauge Pod - 2-1/16"

Skills needed:
Welding
Wiring (powering the gauge)



Find a location for the sensor behind your exhaust manifold or header to drill a hole. Make sure you have plenty of gap not to touch anything else or possibly hit the ground. Drill a hole big enough for only the none threaded piece to fit. The 02 bung will be welded in this spot. After you have a hole big enough, but not too big then start welding this bung in the location. Find a location to mount the connection piece that will have enough room for the sensor and the wiring.

 

Next is mounting the gauge inside where you want it. I mounted mine under my radio with an Autometer cup style gauge pod. After mounting it you will need to run the connection piece that will connect to the sensor through the firewall. Connect the wires to power your gauge.



Now all what is left is to connect the gauge to the sensor. The wire that was run through the firewall is quite long and should be zip tied so that it will not interfere with anything else and not to touch any part of the exhaust because it will burn it.



Now with the AEM Gauge-Type Wideband UEGO Controller
I know where I stand at any time all what I have to do is look at the gauge. I have the opportunity of using this gauge to tune my air/fuel ratio to be correct throughout all of the rpm range.

In the past I have used the narrowband Air/Fuel Ratio gauges and there is just about no use for those. The light jumped back and forth with no way to simply read what it is putting out. With the AEM Wideband it is completely simple to read and much more accurate.



Places to Buy Online:
Performance Trenz Online
Howell Automotive
Modern Performance



How To & Review by Joe

>>To View or Make Comments and Questions about this How to Click Here.


  Howto How To How-To stuff engine dodge neon plymouth neon 95 96 97 98 99 2000 2001 2002 2003 2004 installing a tach install a tach reset pcm reset ecu checking engine codes check engine codes clear corners corner ambder bulb turns turn signal hood cleaning mod rubber seals abbreviations meaning
dodge neon dodge neon plymouth neon 95 96 97 98 99 2000 2001 2002 2003 2004