Howto How To How-To stuff engine dodge neon plymouth neon 95 96 97 98 99 2000 2001 2002 2003 2004

radiator bracket mod modification rad cool air tool deyeme racing moving move



dodge neon dodge neon plymouth neon 95 96 97 98 99 2000 2001 2002 2003 2004

How To's


Radiator Bracket Modification



Ok, so you dont want to drop a small amount of change on a set of Radiator brackets from Deyeme Racing. This is all you have to do to make your own.

Remove the ground from the drivers side bracket and find a new home for it.

Remove both brackets with a 10mm, remove the plastic grommet from the hole. Use something to flatten out the little tabs that stick down from the bottom of the bracket. Also, remove the clip that the ground screws to from the drivers side one.

Now, use a round file or a stepped drill bit to slightly enlarage the hole that is on the left part of each bracket. This is the hole the ground was srewed through.

Lastly, line up the hole that you just enlraged back onto the tabs on the radiator core. Slide them down some to fit them on, line up the bolt hole and finger tighten the 10mm bolt.

Now just kind pull the radiator toward you to flust it up to the support, this will close the gap that used to be there. Turn the bracket so that it holds it tight and finish bolting it down.

Been this way for about 20k on a few cars around here, and it works great, costs nothing and looks 'pert near stock.


Submitted by:
Jeremy S.
Midwest NRG

>>To View or Make Comments and Questions about this How to Click Here.


  Howto How To How-To stuff engine dodge neon plymouth neon 95 96 97 98 99 2000 2001 2002 2003 2004 installing a tach install a tach reset pcm reset ecu checking engine codes check engine codes clear corners corner ambder bulb turns turn signal hood cleaning mod rubber seals abbreviations meaning
dodge neon dodge neon plymouth neon 95 96 97 98 99 2000 2001 2002 2003 2004